The DRENATER SERIES subsoilers allow the microcracking of the soil with variation of the depth. The goal of the action is to facilitate the proper drainage of water, but also to avoid the mixing of deep and still layers inside the soil. It is possible to install the following attachments: drain ball cock, scoring disk and a pair of deep-working wheels.
They are available in the following versions:
Drenater DRP-M1 Subsoiler available from 1 tooth, an operating depth of 75 cm and perfect for machines with a power take-off between 80 and 120 HP.
Drenater DRP-P1 Subsoiler available from 1 tooth, an operating depth of 85 cm and perfect for machines with a power take-off between 110 and 240 HP.
Drenater DRP-P2/P3 Subsoiler available from 2 to 3 teeth, an operating depth of 85 cm and perfect for machines with a power take-off between 160 and 300 HP.
| Model | Power take-off (HP) | No. Teeth | Height mm | Operating depth mm | Width mm | Weight Kg |
|---|---|---|---|---|---|---|
| DRP-M1 | 80/120 | 1 | 900 | 750 | 1050 | 240 |
| DRP-P1 | 110/180 | 1 | 1000 | 850 | 1100 | 365 |
| DRP-P2 | 160/240 | 2 | 1000 | 850 | 2500 | 790 |
| DRP-P3 | 180/300 | 3 | 1000 | 850 | 2500 | 1030 |
- steel chisel
- bevelled edge knife for tooth protection
- teeth safety device
- drain ball cock
- scoring disk on DRP/P1 model
- deep-working wheels on DRP/P2-P3 model
